www.seclore.com Sitemap

Seclore FileSecure HotFolder Server

 
 
ÔĽŅ
Release Notes for Seclore HotFolder Server.
-------------------------------------------------------------------------------------------------------------
Seclore 3.14.2.0
Seclore HotFolderServer 3.2.3.0
September 1, 2020

   1. Removed unused Add and Edit button displayed under credential section of Hot Folder Enterprise Manager. (#9117)
        a. Earlier, when Hot Folder Enterprise Manager was launched, Add and Edit buttons were always in disabled state under the credentials section. 
        b. Now, these unused buttons have been removed.
   2. Other fixes. (#9623)

-------------------------------------------------------------------------------------------------------------
Seclore 3.14.0.0
Seclore HotFolderServer 3.2.2.0
August 1, 2020

   1. Introducing changes in Hot Folder Server installation. (#9503) 
        a. Earlier, while installing Hot Folder Server, the installer checked if Seclore Desktop Client was installed in the system or not.  
        b. If Seclore Desktop Client was installed, the Hot Folder Server installation was aborted. 
	c. Now, this check is removed. The Hot Folder Server can be installed even if Desktop Client already is installed in a system. 

-------------------------------------------------------------------------------------------------------------
Seclore 3.12.2.0
Seclore HotFolderServer 3.2.1.0
May 15, 2020

   1. Fixed the following issues: (#9233) 
        a. User was unable to open a HTML wrapped file from a Hot Folder that was created in C: drive of a machine.
            i. Before the fix: A Hot Folder was configured in the C: drive of a machine and files were protected and HTML wrapped by placing in it. 
            ii. User was unable to open a HTML wrapped file from the same Hot Folder. 
            iii. This issue was not observed with non-wrapped protected files. 
            iv. After the fix: All files protected using Hot Folders created in any drive of a machine including the C: drive can be opened successfully. 
        b. When an HTML wrapped file was deleted from a Hot Folder and the original file was placed again in the same Hot Folder, a replace prompt was displayed. 
            i. Before the fix: An HTML wrapped file was deleted from a Hot Folder. 
            ii. If the original unprotected or protected file was placed in the same Hot Folder again, a replace prompt was displayed. 
            iii. After the fix: When a HTML wrapped file is deleted from a Hot Folder and the original file is placed again in the same Hot Folder, the replace prompt will not be displayed.
   2. Other fixes (#9245)
 
-------------------------------------------------------------------------------------------------------------
Seclore 3.12.1.0
Seclore HotFolderServer 3.2.0.0
Apr 16, 2020

   1. Introducing Universal Protection and HTML wrapping of standard file formats in Hot Folders. (#9018) 
        a. Earlier, non-standard file formats were protected and given .seclore extension when placed in a Hot Folder. 
        b. Files protected with .seclore extension could only be opened in Seclore Desktop Client.
        c. Now with the support of Universal Protection, non-standard file formats will be HTML wrapped and given the .html extension when placed in a Hot Folder allowing them to be consumed in all Seclore agents.
        d. The files previously protected and given .seclore extension will be HTML wrapped and given the .html extension as well. 
        e. Additionally, there will be a provision to automatically HTML wrap standard file formats placed in Hot Folders.
        f. Requires 
            i. Policy Sever version 3.8.2.0 or above. 
            ii.Universal Protection and HTML wrapping feature to be enabled in Policy Server 
-------------------------------------------------------------------------------------------------------------
Seclore 3.6.2.0
Seclore HotFolderServer 3.1.2.0
Mar 15, 2018

   1. Support for protecting files that are very large in size, up to 50GB. (#6350)

-------------------------------------------------------------------------------------------------------------
Seclore 3.5.2.0
Seclore HotFolderServer 3.1.1.0
Jan 1, 2018

   1. Optimized the utilization of server memory resources when scanning folders that have a very large number of files. (#6280)
   2. Other fixes (#6305, #6310, #6311)
   
-------------------------------------------------------------------------------------------------------------
FileSecure 3.5.0.0
FileSecure HotFolderServer 3.1.0.0
Dec 1, 2017

   1. Added an all new Folder Scanning process to improve the reliability of the Hot Folder protection mechanism. (#5899, #5900) 
       a. Earlier, the protection service was overly dependent on the Windows event framework to identify file drop events and on rare occasions could lead to some files in the Hot Folder remaining unprotected.
       b. With these changes, any files dropped into a Hot Folder missed by the Windows event framework will be covered by the Folder Scanning process and will always get protected.
       c. The scanning process is scalable to handle large data volumes and can be tuned to optimize for server resource utilization.
       d. Expected Behaviour: Empty files (of size 0 KB) of formats supported for Basic Protection will not be protected.
   2. Added horizontal scrolling while selecting credentials (policies) in the Hot Folder Server Enterprise Manager to avoid truncation of credential names. (#5938)
   3. Fixed the issue of a generic, non-specific error message being displayed while creating a cabinet before configuring a Policy Server profile. An adequate error message explaining the issue will now be displayed. (#6175)
   4. Fixed the rare issue of high CPU usage and occasional machine freezing while protecting a very large number of files. (#6176)
   5. Other fixes. (#6222)

------------------------------------------------------
FileSecure 3.1.0.0
FileSecure HotFolderServer 3.0.0.0
Aug 16, 2017

   1. Added support for Enhanced Basic Protection for SOLIDWORKS design assemblies. (#5783) 
       a. Files with .SLDASM, .SLDPRT and .SLDDRW extensions will not be appended with the .seclore extension. 
       b. After this change, protected SOLIDWORKS design assemblies with interlinked part files will open seamlessly with the latest version of the Seclore Desktop Client. 
   2. Added full 64-bit support to improve the speed and hardware utilization for the protection service. (#5802)
   3. Other fixes. (#5801) 

------------------------------------------------------
FileSecure 2.109.1.0
FileSecure HotFolderServer 2.7.3.0
May 23, 2017

   1. Added support for protecting files with .rh and .vds extensions (#5518)
   2. Updated the icon overlay on protected file icons to display the new Seclore red lock image. (#5516)
   3. Added support to recognize ‚??HTML wrapped‚?? files as protected files in Hot Folder operations. (#5515)
   4. Other fixes: #5226, #5507, #5517, #5519.

------------------------------------------------------
FileSecure 2.95.0.0
FileSecure HotFolderServer 2.7.1.0
Jul 15, 2016

   Bug Fixes:
   1. Issue: Since January 2016, the Hot Folder Server installer (which was signed with SHA-128 digital signature) was not compatible with the latest Windows Server versions. (#4719)
      Resolution: The installer is now digitally signed with both SHA-1 and SHA-256 to be compatible with all supported Windows Server versions.  
   2. Issue: The Hot Folder Server Enterprise Manager did not function normally when the classification name contained the ‚??%‚?? character. (#4356)
      Resolution: Fixed the issue.
   3. Issue: Folders that were not available when the Hot Folder service was started were not monitored for file protection ‚?? even when they became available later. (#4714)
      Resolution: Fixed the issue.
   4. Issue: In certain rare cases, files saved in a Hot Folder using the ‚??Save As‚?? option did not get protected. (#4718)
      Resolution: Fixed the issue.
   5. Issue: When the Policy Server profile of the Hot Folder server is changed, the ‚??Process‚?? button did not work as expected. (#4820)
      Resolution: Fixed the issue.
   6. Other fixes: #4715, #4717, #4720.

------------------------------------------------------
FileSecure 2.82.0.0
FileSecure HotFolderServer 2.7.0.0
Oct 31, 2015

   Features : 
   1. Support for protecting ANY file format in the enterprise (#4227, #4248, #4265)
        a) Enforcing Basic Protection controls ‚?? Who, When and Where for any file format
        b) Identity based protection now available for all formats including design, engineering and media files
        c) Protected files other than the standard formats will have '.seclore' appended after their extension (e.g. The file Plan.cdr will become Plan.cdr.seclore after protection) 
        d) As a security precaution, executables, code libraries and scripts will not be protected 
        e) Improved look and feel of the FileSecure HotFolder Server.
        f) Original file icon shall be shown in Windows Explorer for all files with '.seclore' extension.
   2. Minor UI changes on the Hot Folder definition page. (#4228)

   Bug Fixes:
   1. Issue: Installer would not terminate in case of an error. (#4266)
      Resolution: FileSecure Hot Folder Server Installer has been changed to take care of this issue.
   2. Issue: Performance improvements required in the logging functionality of HotFolder Server. (#4250)
      Resolution: FileSecure Hot Folder Server is modified to take care of this issue.
   3. Issue: Hot Folder Enterprise Manager crashes on click of the ‚??Process‚?? button when running on Windows Server 2012 R2. (#4273)
      Resolution: Hot Folder Enterprise Manager is modified to take care of this issue.
   4. Other fixes: #4254, #4249, #4276.
   
------------------------------------------------------
FileSecure 2.68.0.0
FileSecure HotFolderServer 2.6.0.0
Nov 28, 2014

   Bug Fixes:
   1. Issue: FileSecure HotFolder Server fails to protect files of large size. (#3600, #3628)
      Resolution: This behavior is observed on the machines where RAM size is lower. At the time of protection, FileSecure HotFolder Server reads the entire file in memory. This results in huge RAM utilization in case of large files. Now, for protection, file content gets encrypted in small chunks rather than whole content which should minimize the RAM utilization. Also, deprecated 'Max Memory Allowed' parameter because we are not processing file in-memory. This parameter defines that only one file of size more than this should be processed by HotFolder Server to minimize memory utilization.
   2. Issue: FileSecure HotFolder Server communicates with Policy Server over SSLv2 and SSLv3 only. It does not communicate over TLS protocols. (#3601)
      Resolution: FileSecure HotFolder Server has been changed to communicate over SSLv3, TLSv1.0, TLSv1.1 and TLSv1.2 by default. Registry configuration is provided to configure which protocols should HotFolder Server use to communicate. SSLv2 is completely disabled.
   3. Issue: FileSecure HotFolder Server utilizes 100% CPU in case of network fluctuation. (#3603)
      Resolution: FileSecure HotFolder Server is changed to take care of this issue.
   4. Issue: File protection is delayed by 15 seconds if attempted with expired session with Policy Server. This delay is caused as time to retry is 15 seconds. (#3627)
      Resolution: Time to retry is reduced to 5 seconds to minimize the delay.
   5. Issue: FileSecure HotFolder Server does not trust many new ROOT CAs. (#3630)
      Resolution: FileSecure HotFolder Server has been changed to include latest ROOT CAs.

------------------------------------------------------
FileSecure 2.46.0.0
FileSecure HotFolderServer 2.5.0.0
June 17, 2013

   Features : 
   1. Tool to anaylze a folder and generate report of protected and unprotected files in CSV format. (#2625)
   2. Improved performance of protection of files.(#2629)
   3. Deprecated User Preferences. Now, Profiles and Proxy settings can be managed using Enterprize Manager itself.(#2029)
   4. Process only one large file at a time to save system resources.(#1296, #2630)
   5. Purge logs after configured time interval.(#2631)
   6. Roll log file depending after it reaches configured max. log file size or a configured time interval.(#2624)

   Bug Fixes:
   1. Support for automatic detection of proxy settings from DHCP and proxy script.(#2628)

------------------------------------------------------
FileSecure 2.32.6.0
FileSecure HotFolderServer 2.4.1.0
May 07, 2012

   Bug Fixes:
   1. Larger files are not getting protected on remote drive. Files in HotFolder does not protect because of disk of some other HotFolder is full. (#1296)
   2. Logs are not archived. (#477)
   3. Windows Update KB2585542 conflicts with Seclore FileSecure HotFolder Server. (#1338)
   4. Protected file icon is not shown in Widows Explorer on 64-bit OS. (#1443)
   5. Other fixes: #1442

------------------------------------------------------
FileSecure 2.31.0.1
FileSecure HotFolderServer 2.4.0.1
Nov 22, 2011

   Features:
   1. More secure communication with policy server.

   Bug Fixes:
   1. Hotfolder Enterprise Manager crashes on while connecting to policy server running on Apache

------------------------------------------------------
FileSecure 2.30.0.0
FileSecure HotFolderServer 2.4.0.0
Sept 21, 2011

   Features:
   1. Support for defining network folders as Hot Folders. (#1128)

   Bug Fixes:
   1. Hotfolder Enterprise Manager crashes on 'Process Now' button click.
   2. Unable to protect some files if multiple files are dropped in HotFolder. (#1083, #1086)


------------------------------------------------------
FileSecure 2.25.2.0
FileSecure HotFolderServer 2.3.1.0
May 20, 2011

   Bug Fixes:

   1. Paused Hot Folders are processed when Hot Folder service starts, as a result files take long time to protect. (#1026, #1032)
   2. Folder with path longer than 100 characters can not be defined as Excluded Folder. Enterprise Manager does not show error in this case. (#990)
   3. Hot Folder Server crashes/misbehaves if the file being processed for protection is more than 260 chars. Now, files and folders of path length up to 1000 characters can be processed by Hot Folder Server.(#967)

------------------------------------------------------
FileSecure 2.21.0.0
FileSecure HotFolderServer 2.3.0.0
Dec 10, 2010

   Features:
   1. Support for protecting files with buffer file if size more than 60K. (#798)

   Bug Fixes:
   1. Incorrect error message displayed when an excluded folder is added as a Hot Folder. (#239)
   2. Incorrect error message displayed when parent Hot Folder is removed after the removal of it's child Hot Folder. (#242)
   3. Incorrect error message displayed when a parent of an Excluded Folder is set as Excluded Folder. (#243)
   4. Policy Server identifier does not change for Hot Folder after updating the Server Profile. (#693)

------------------------------------------------------
FileSecure 2.20.2.0
FileSecure HotFolderServer 2.2.1.0
Oct 8, 2010

   Bug Fixes:
   1. Hot Folder Server (service) crashes at startup if number of folders are very high. (#786)

------------------------------------------------------
FileSecure 2.16.0.0
FileSecure HotFolderServer 2.2.0.0
Jan 22, 2010

   Bug Fixes:
   1. Multiple issues is Hot Folder server due to which(SUPPORT ID #315, #323, #324, #363)
      a. File is getting protected multiple times and causing data loss.
      b. File is not getting protected, if file is dropped in the Hot Folder with the same name.
   2. Multiple files of large size are not protected simultaneously, because of memory unavailability.

------------------------------------------------------
FileSecure 2.11.0.0
FileSecure HotFolderServer 2.1.0.0
Aug 19, 2009

   Internal changes due to change in signature of Authenticate and ProtectWithHotFolder APIs of PSAPI Library.
   Policy Server Protocol has been changed as per web services APIs.

------------------------------------------------------
FileSecure 2.9.0.0
FileSecure HotFolderServer 2.0.0.0
May 25, 2009

   This is first release of FileSecure HotFolderServer.